The gate is in pause
1
Push and release the TIMES button
THE L.E.D. for opening and closing are switched on
The new PAUSE TIME run.
2
Press and release the TIMES button
The gate CLOSES. End of the fast learning time
and PAUSE TIME.
5.4 TIME LEARNING: Pause (fastest way)
TIMES
5.5 Cancel of the memory code of the control board
The cancellation of the control board , put the original times of the control board.
Keep pressed both PULSANTE CODICI and PULSANTE TIMES for 10 seconds till the three l.e.d. OPEN, CLOSE and
CODES are switched off. The cancellation of the memory of the control board doesn’t cancel the memorized codes: it is
two different memories.
12
6
Manuals for the TEST function
Now the control unit check the TEST
function of all devices and the the gate opens with a little bit delayed
8
6
9 10
7
8
Make all connections to the TEST as shown in the manuals
1
When the control unit is turned off, put the DIP8 of DIPA in OFF position
2
Power the control unit and wait the fl ashing of the L.E.D.
3
Put the DIP8 of DIPA in ON position
4
Let the gate opens with START control or try with the memorization of the working time ( Paragraph 5.1)
The TEST function is compatible with devices with slower response ( for example TRANSCEIVER) so the opening ma-
noeuvre can be a little bit delayed. Besides you can test the devices in the STOP input.
To check that all devices are connected to the inputs FOTO, FOTOSTOP ( Photo-beam B) and STOP and if the TEST function is avail-
able, make the following procedure
10
7
77
DIP A
DIP A
