B3
7
3.
INSTALLATION
You can download the installation video from
www.n-com.it
N-Com / Download section.
Fig. 1
Fig. 2
Fig. 3
Remove the “N-Com” protection plate
located on the helmet shell (Fig. 1) and
open the helmet chin guard (flip up
helmets).
Remove the right and left cheek pads from
the
helmet (see specific instructions
provided in the user manual of the helmet).
Remove the Noise Reducers from the two
cheek pads, and tear off the pre-cut plastic
(if equipped).
Fig. 4
Fig. 5
Fig. 6
Remove the back of the comfort padding
by pulling on the neck roll until it separates
from the shell (Fig. 4).
Temporarily put the padding on the outside
of the helmet (Fig. 5).
Remove the N-Com cover from the helmet
border gasket. Push from the inside of the
helmet to facilitate the removal (Fig. 6).
