18
10.
MUSIC VIA BLUETOOTH
You can listen to high quality music by connecting the N-Com system to a device equipped with
Bluetooth A2DP (Advanced Audio Distribution Profile) protocol.
The N-Com system is also equipped with Bluetooth AVRCP (Audio Video Remote Control Profile)
protocol, which allows you to stop and resume music reproduction directly from the helmet (with
devices equipped with AVRCP).
Play music (Play)
Press the “
” button and keep it pressed for 2 seconds.
Pause function (Pause)
When the player is connected and playing music, press “
” for 2
seconds.
Next track (Skip)
When the player is playing music, press “
” for 4 about seconds.
Stop playing music (Stop)
Press “
” for 2 seconds. The music stops and the A2DP player is
disconnected.
By moving to another function with the menu key, the system automatically disconnects the A2DP
device.
Note
: The Bluetooth intercom does not work while listening to an A2DP audio source.
11.
MUSIC PLAYER VIA CABLE
N-Com B3 allows connection via cable (sold separately) to audio sources equipped with the 3.5mm
output generally used by these devices for the headsets.
To listen to the audio source, connect the cable to the helmet using the micro-USB port, then start
playing the audio file on the device, then activate the audio peripheral device using the specific key.
Once it is turned on, cable connection stays active even in the subsequent menus. Consequently, you can
hear the device connected via cable even while listening to music via A2DP or via RADIO.
