Nokia PremiCell Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 66

Nokia PremiCell Скачать руководство пользователя страница 51

ã

2000 Nokia Mobile Phones. All Rights Reserved.

51

AT+CMGW Write Message to Memory

This command stores a message in a preferred memory storage se-
lected with the AT+CPMS command. Memory location <index> of a
stored message is returned. By default, the message status will be
set to " STO UNSENT ", but the parameter <stat> also allows other
status values to be given. Entering of text is done similarly as spec-
ified in the command AT+CMGS. This command form applies only to
the SMS text mode, and the PDU mode form of the command is de-
scribed in the next sec-
tion.

Syntax:

AT+CMGW=<addr>[,<type>[,<stat>]]<CR>text<ctrl-Z/ESC>

Store message.
Response is +CMGW:<index>.

Parameters:

<addr>

“origin or destination address in string format”

<type>

type of origin or destination address, 129 for

normal

and 145 for international access (number con-

tains ‘+’

character)

<stat>

“REC UNREAD”

received unread message

“REC READ”

received read message

“STO UNSENT”

stored unsent message (default)

“STO SENT”

stored sent message

<index> location

number

«
...
49
50
51
52
53
...
»

Содержание PremiCell



































































Отзывы:

Нет отзывов