Nokia PremiCell Скачать руководство пользователя страница 36

Страница: 36 / 66

2.7. Miscellaneous Commands

A/ Re-Execute Command Line

Re-executes the command preceding this re-
quest.

Syntax:

A/ Re-execute previous command.

AT? Command Help

Returns a list of available AT commands and Help in English. This
command must be alone on the command line.

Syntax:

AT?[<n>] Display AT command help screen.

AT*C Start SMS Interpreter

This command activates the Short Message Service Interpret-
er.

Syntax:

AT*C

Activate SMS interpreter.

Commands available in the SMS Interpreter:

SEND

Send a short message.

STORE, STORE/SIM

Store a short message to active

SIM memory.

DIR, DIR/SIM, DIR/NEW

A short message stored in ac-

tive or

SIM memory is displayed.

SHOW

Display current SMS transmis-

sion

parameters.

SAVE

Save current SMS transmission
parameters in the memory of

the

phone.

HELP

Display list of available SMS
commands.

Содержание PremiCell



































































Результаты поиска

Содержание PremiCell

Отзывы:

Nokia PremiCell, Руководство пользователя, Страница: 36 / 66

Результаты поиска

Содержание PremiCell

Отзывы: