Nokia PremiCell Скачать руководство пользователя страница 26

Страница: 26 / 66

DTR ON-OFF causes a transition to the on-line
command state.

DTR ON-OFF hangs up the phone.

DTR ON-OFF hangs up the phone and resets the

data

parameters to the start-upvalues.

K Select Flow Control

This command selects the local flow control mode. Using this com-
mand is not recommended, instead use the AT+IFC com-
mand.

Syntax:

K[0] Disable

flow

control.

Set hardware flow control (CTS/RTS).

Set software flow control (XON/XOFF).

Q Define Communications Mode Option

This command defines the dialling and on-line op-
tions.

Syntax:

Q[0]

Enable normal asynchronous operation.

Enable DTR controlled dial. DTR OFF to ON caus-

es a

call to be made to the number stored in the dial

slot

one (1).

DTR ON to OFF

hangs up the phone.

S Define DSR Option

This command defines how the DSR V.24 signal is han-
dled.

Syntax:

S[0]

Keep DSR always ON.

Enable normal DSR usage*

*This is "always ON" with 09i/18i PremiCell. The command is includ-
ed for compatibility purposes.

Содержание PremiCell



































































Результаты поиска

Содержание PremiCell

Отзывы:

Nokia PremiCell, Руководство пользователя, Страница: 26 / 66

Результаты поиска

Содержание PremiCell

Отзывы: