Nokia PremiCell Скачать руководство пользователя страница 25

Страница: 25 / 66

ATV Define Response Format

This command determines whether result codes are transmitted in
a numeric form or an alphabetic (or verbose) form.

Syntax:

ATV[0]

Select numeric (short form) responses.

ATV1

Select textual (long) responses.

ATX Response Range Selection

This command selectively enables or disables the response codes
sent to the DTE.

Syntax:

ATX[0]

Enable response codes 0... 4.

ATX1

Enable response codes 0... 5, 10.

ATX2

Enable response codes 0... 5, 10.

ATX3

Enable response codes 0... 5, 7, 10.

ATX4

Enable response codes 0... 5, 7, 8, 10.

ATX5

Enable all response codes.

C Define DCD Usage

This command determines how the state of the DCD V.24 signal re-
lates to the detection on the received line signal from the distant
enSyntax:

C[0]

Keep DCD always ON.

Enable normal DCD usage*

*This is "always ON" with 09i/18i PremiCell. The command is includ-
ed for compatibility purposes.

D Define DTR Usage

This command defines how the DTR V.24 signal from the DTE is han-
dled.

Syntax:

D[0]

DTR is ignored if AT

Q0 is selected. DTR ON-OFF

hangs up the terminal if AT

Q2 is selected.

Содержание PremiCell



































































Результаты поиска

Содержание PremiCell

Отзывы:

Nokia PremiCell, Руководство пользователя, Страница: 25 / 66

Результаты поиска

Содержание PremiCell

Отзывы: