1
Place the indoor ONT unit on a flat surface, such as a desk or shelf.
Note:
The XS-2426G-A cannot be stacked with another ONT or with other equipment.
The ONT mounting requirements are:
•
allow a minimum 100 mm clearance above the top cover
•
allow a minimum 50 mm clearance from the side vents
•
do not place any heat source directly above the top cover or below the bottom cover
2
Review the connection locations, as shown in
Figure 6-1, “XS-2426G-A ONT connections”
3
Connect the Ethernet cables to the RJ-45 ports.
4
Route the POTS cable directly to the RJ-11 port as per local practices.
5
Figure 6-1
XS-2426G-A ONT connections
ON/OFF
RESET
WLAN
POWER
LAN4
LAN3
LAN2
LAN1
TEL2
TEL1
LED
WPS
36553
POTS port
(RJ-11)
Ethernet
ports (4)
(RJ-45)
Power
Reset
button
Wi-Fi
security/
on/off buttons
On/off
button
USB
port
Fiber optic
port
USB
Install a XS-2426G-A indoor ONT
Procedure
Nokia ONT
Draft
Draft
December 2020
Issue 1
63
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA