Figure 5-3, “XS-2426G-A indoor ONT with fiber optic connector” (p. 48)
shows the XS-2426G-A
indoor ONT with a fiber optic connector.
Table 5-4, “XS-2426G-A indoor ONT physical connections” (p. 49)
describes the physical
connections for XS-2426G-A indoor ONTs.
Table 5-4
XS-2426G-A indoor ONT physical connections
Connection
Print Letters
Description
POTS port
TEL1 and TEL2
This connection is provided through an RJ-11 port. One POTS connection is supported.The
POTS port supports voice services.
Ethernet ports
LAN1 to LAN4
This connection is provided through Ethernet RJ-45 connectors. Up to four 10/100/1000
Base-T Ethernet interfaces are supported.The Ethernet ports can support both data and
in-band video services on all four interfaces.
Power input
POWER
This connection is provided through the power connector. A power cable fitted with a barrel
connector is used to make the connection.
Reset button
RESET
Pressing the Reset button for less than 10 seconds reboots the ONT; pressing the Reset
button for 10 seconds resets the ONT to the factory defaults, except for the LOID and SLID.
WLAN button
WLAN
Wi-Fi service is compliant with IEEE 802.11 standards and is enabled and disabled using the
WLAN button.
WPS button
WPS
The Wi-Fi Protected Setup (WPS) button enables and disables the WPS.
LED button
LED
The LED button turns the LED indicators on or off.
Figure 5-3
XS-2426G-A indoor ONT with fiber optic connector
ON/OFF
RESET
WLAN
POWER
LAN4
LAN3
LAN2
LAN1
TEL2
TEL1
LED
WPS
36552
USB
XS-2426G-A unit data sheet
XS-2426G-A interfaces and interface capacity
Nokia ONT
Draft
Draft
December 2020
Issue 1
49
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA