Nokia IP60 - Security Appliance, Руководство пользователя

Страница: 105 / 494

Enabling/Disabling the Internet Connection
Chapter 5: Configuring the Internet Connection 105
Enabling/Disabling the Internet Connection
You can temporarily disable an Internet connection. This is useful if, for example, you are going on
vacation and do not want to leave your computer connected to the Internet. If you have two Internet
connections, you can force the IP60 appliance to use a particular connection, by disabling the other
connection.
The Internet connection’s Enabled/Disabled status is persistent through IP60 appliance reboots.
To enable/disable an Internet connection
1. Click
Network
in the main menu, and click the
Internet
tab.
The
Internet
page appears.
2. Next to the Internet connection, do one of the following:
To enable the connection, click .
The button changes to and the connection is enabled.
To disable the connection, click .
The button changes to and the connection is disabled.
Using Quick Internet Connection/Disconnection
By clicking the
Connect
or
Disconnect
button (depending on the connection status) on the
Internet
page,
you can establish a quick Internet connection using the currently-selected connection type. In the same
manner, you can terminate the active connection.
The Internet connection retains its Connected/Not Connected status until the IP60 appliance is rebooted.
The IP60 appliance then connects to the Internet if the connection is enabled. For information on enabling
an Internet connection, see
Enabling/Disabling the Internet Connection on page 105.
Configuring a Backup Internet Connection
You can configure both a primary and a secondary Internet connection. The secondary connection acts as a
backup, so that if the primary connection fails, the IP60 appliance remains connected to the Internet.
You have full flexibility in deciding which port to use for each Internet connection. You can assign the
primary connection to use any of the following ports:
WAN port (on Non-ADSL models)