Nokia IP1200 Series, Руководство по установке

Страница: 90 / 156

5
Connecting PMC Network Interface Cards
90 Nokia IP1200 Series Security Platform Installation Guide
To connect the NIC to a CSU/DSU, use a straight-through V.35 or X.21 cable.
To connect the NIC directly to a Cisco IP security platform, use a Cisco DCE
cable. You can order appropriate adapter cables separately.
To determine the type of interface (V.35 or X.21), look at the connector on the
front panel of the NIC.
Figure 23 and Figure 24 show the physical
configuration for each connector type.
Figure 23 Output Connector for the V.35 Cable
Signal Ground B
Clear to Send D
Receive Line Signal Detect F
Local Loopback J
Received Data R
Received Data T
Receive Timing V
Receive Timing X
A Chassis Ground
C Request to Send
E Data Set Ready
H Data Terminal Ready
P Transmitted Data
S Transmitted Data
U Terminal Timing
W Terminal Timing
Y Transmit Timing
AA Transmit Timing