Nokia IP1200 Series, Руководство по установке

Страница: 88 / 156

5
Connecting PMC Network Interface Cards
88 Nokia IP1200 Series Security Platform Installation Guide
When you purchase a single-port V.35 or X.21 NIC with your IP1200 Series,
the NIC is installed before the appliance is delivered to you and the appliance
arrives with the appropriate cable.
When you order a NIC after you receive the appliance, the NIC arrives with
the specified cable. For information about how to add or replace a NIC, see
Chapter 4, “Installing and Replacing Network Interface Cards.”
Single-Port V.35 or X.21 NIC Features
The V.35 or X.21 NIC supports the following features:
„ Berkeley Packet Filtering (BPF)
„
Conformance with RFC 1661 (PPP), 1662 (PPP in HDLC-like framing),
1332 (PPP-IPCP), 1490 (frame relay), and Cisco HDLC
„
PCI operation at 33 MHz
„
Link LED is green
To determine the running speed of a network interface card
1.
Click Monitor on the Nokia Network Voyager home page.
2. Click the Slot Status link.
Each occupied slot is listed along with the supported and actual speed of
the installed NIC.
You can configure and monitor V.35 or X.21 NICs with Nokia Network
Voyager. For information about how to access Network Voyager and the
related reference materials, see
“Accessing Nokia Network Voyager
Reference Information” on page 48.