
A UMTS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The
icon may vary between regions. If the icon is
, the connection is active. If the icon is , the
connection is on hold.
You have set the device to scan for WLANs, and
a WLAN is available.
A WLAN connection is active in a network that
does not have encryption.
A WLAN connection is active in a network that
has encryption.
Your device is connected to a computer with a
USB data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If
you have two phone lines, a number indicates
the active line.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in the do not
disturb mode, because the ringing type setting
of your device is set to
Beep once
or
Silent
, or
you have an incoming or ongoing phone call.
In this mode, you cannot make PTT calls.
Volume control
To adjust the earpiece volume during a phone call or
the volume of the media applications, use the volume
keys.
Get started
28
Get started