Using Q1 menus
DN01145897
© Nokia Corporation
109 (128)
Issue 2-0 en
Nokia Proprietary and Confidential
-
CTS use (
6,4, port #,3,3,1
)
The suboptions of the menu allow you to:
•
display the current use of the circuits
•
set the CTS (106) circuit ON
•
make the CTS circuit follow the RTS (105) circuit with a 8-
bit delay in transition from the OFF state to the ON state
•
make the CTS circuit follow the RTS circuit with a 255-bit
delay in transition from the OFF state to the ON state
•
set the RTS circuit to control the DCD (109) circuit at the
remote end (
Simulated carrier
).
-
DCD use (
6,4, port #,3,3,2
)
The suboptions of the menu allow you to:
•
display the use of the DCD circuit
•
set the DCD circuit to follow the synchronisation of the line
(frame sync on
−
> DCD on)
•
set the DCD circuit to follow the simulated carrier signal
(V.13).
-
DSR & DTR use (
6,4, port #,3,3,3
)
The suboptions of the menu allow you to:
•
display the current use of the DSR (107) and DTR (108)
circuits
•
set the DSR circuit to follow the state of the DTR circuit
•
set the DSR circuit to ON state, the DTR circuit not being in
use.
-
CT140 use (
6,4, port #,3,3,4
)
The suboptions of the menu allow you to:
•
display the current use of circuit 140
•
enable or disable circuit 140 to control the remote loop to line.
-
CT141 use (
6,4, port #,3,3,5
)
The suboptions of this menu allow you to:
•
display the current use of circuit 141
•
enable or disable circuit 141 to control the local loop.
G.704/2M-type interface settings (6,4, port #,3)
•
Framing format (6,4, port #,3,1)
The use of the G.704 framing can be selected or its use can be prevented
using this menu (see Figure 65). The selections are:
-
No frame
-
Basic frame
-
CRC multiframe
