7368 ISAM ONT G-240W-G Product Guide
Install a G-240W-G indoor ONT
Issue: 01
3FE-47555-AAAA-TCZZA
61
5.6
Procedure
Use this procedure to install a G-240W-G indoor ONT.
1
Place the indoor ONT unit:
a
On the flat surface, such as a desk; go to step
.
b
On a wall, go to step
.
2
Mount the G-240W-G indoor ONT on a wall.
The G-240W-G indoor ONT must be mounted in a horizontal position, as indicated by the wall
mounting key holes in Figure
.
If possible, mount the ONT on a wall stud.
Figure
shows the ONT with the connections and the key mounting holes.
Note —
The G-240W-G cannot be stacked with another ONT or with
other equipment. The ONT mounting requirements are:
•
allow a minimum 100 mm clearance above the top cover
•
allow a minimum 50 mm clearance from the side vents
•
do not place any heat source directly above the top cover or below the
bottom cover
Release 05.08.01a | August 2018 | Edition 01