7368 ISAM ONT E-240W-A Product Guide
ETSI ONT safety guidelines
Issue: 01
3FE-46974-AAAA-TCZZA
19
Figure 1
PSE certification
2.2
Safety standards compliance
This section describes the ONT compliance with the European safety standards.
2.2.1
EMC, EMI, and ESD compliance
The ONT equipment complies with the following EMC, EMI, and ESD requirements:
•
ETSI EN 301 489-1 V2.1.1:2017 Electromagnetic compatibility and Radio
spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical requirements
•
ETSI EN 301 489-17 V3.1.1: 2017 Electromagnetic compatibility and Radio
spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio
equipment; Part 17: Specific conditions for Broadband Data Transmission
Systems
•
EN 300-386 V1.5.1: Electromagnetic Compatibility and Radio Spectrum Matters
(ERM): Telecommunications Network Equipment; Electromagnetic Compatibility
(EMC) requirements
•
EN 55032:2015 Class B, Information Technology Equipment, Radio Disturbance
Characteristics, limits and methods of measurement
•
EN 55024 (2010): Information Technology Equipment, Immunity Characteristics,
limits and methods of measurement
•
European Council Directive 2004/108/EC
2.2.2
Equipment safety standard compliance
The ONT equipment complies with the requirements of EN 60950-1, Safety of
Information Technology Equipment for use in a restricted location (per R-269).
This is a Class B product based on the standard of the Voluntary Control Council for Interference
from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in
a domestic environment, it may cause radio interference. Install and use the equipment according
to the instruction manual.
Warning
19841
Release 06.00.00h | January 2019 | Edition 08