Configure an E-240W-A indoor ONT
112
7368 ISAM ONT E-240W-A Product Guide
3FE-46974-AAAA-TCZZA
Issue: 01
Table
describes the fields in the Access Control window.
Table 35
Access control parameters
2
Select a WAN connection from the drop-down menu.
3
Click to enable or disable Trusted Network.
4
Select an access control level for each of the four protocols: ICMP, SSH, HTTP, and TR-069
for both the WAN and the LAN side.
5
Click Save.
6
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
7
STOP. This procedure is complete.
7.2.5
Application configuration
E-240W-A ONT also supports application configuration, including:
•
port forwarding
•
port triggering
•
DDNS
•
NTP
•
USB storage
Field
Description
WAN
Choose a connection from the drop-down menu
Trusted Network Enable
Click to enable or disable
ICMP, SSH, HTTP, TR-069
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Source IP Start
Enter a start IP address for the new subnet trusted network
Source IP End
Enter an end IP address for the new subnet trusted network
Release 06.00.00h | January 2019 | Edition 08