Nokia 105s, Руководство по установке

Страница: 36 / 112

2
Installing the Nokia 105s Gateway
36 Nokia 105s Gateway Installation Guide
Table 6 Pin Assignments Console Connector and Cable
The console cable provided with the 105s is comprised of two parts:
„ 6-foot rollover cable with RJ-45 terminations
„
RJ-45 to DB-9 adapter
On the opposite end of the console cable, connect the RJ-45 to the DB-9
adapter, which you can then connect to the host terminal.
Auxiliary Port
Use the built-in serial (AUX) port, shown in Figure 1 , to establish a modem
connection for managing the gateway remotely or out-of-band. The default
configuration of the serial ports are: 9600 baud, 8 bits, no parity, and 1 stop.
bit.
Table 7 provides pin assignment information for modem connections.
Console Port
(DTE) RJ-45 to RJ-45 Rollover
Cable
RJ-45 to DB-9
Terminal
Adapter
Remote Device
Signal RJ-45 Pin RJ-45 Pin DB-9 Pin Signal
RTS 1 8 8 CTS
DTR 2 7 6 DSR
TxD 3 6 2 RxD
GND 4 5 5 GND
GND 5 4 5 GND
RxD 6 3 3 TxD
DSR 7 2 4 DTR
CTS 8 1 7 RTS