Nokia 105s, Руководство по установке

Страница: 24 / 112

1
Overview
24 Nokia 105s Gateway Installation Guide
The location and meaning of the status LEDs for NICs are described in
Chapter 5, “Connecting PMC Network Interface Cards.”
„
For information on the built-in Gigabit Ethernet interface LEDs, see
“Built-In Gigabit Ethernet Ports” on page 21.
„ For information on the four-port Ethernet NIC LEDs, see “Four-Port 10/
100 Mbps Ethernet NICs” on page 59.
Managing the 105s Gateway
You can manage the 105s gateway by using one of the following interfaces:
„
Nokia Network Voyager— an SSL-secured, Web-based element
management interface to Nokia gateways. Network Voyager is
preinstalled on the 105s gateway and enabled through the IPSO operating
system. With Network Voyager, you can manage, monitor, and configure
the 105s gateway from any authorized location within the network by
using a standard Web browser.
For information about how to access Network Voyager and the related
reference materials, see
“Using Nokia Network Voyager” on page 43.
„
The IPSO command-line interface (CLI)— an SSHv2-secured interface
that enables you to easily configure 105s appliances from the command
line. Everything that you can accomplish with Network Voyager—
manage, monitor, and configure the 105s gateway—you can also
accomplish with the CLI.
Site Requirements, Warnings, and Cautions
Before you install a Nokia 105s gateway, ensure that your computer room or
wiring closet conforms to the environmental specifications listed in
Chapter
A, “Technical Specifications.”