Connecting to the Console or Auxiliary Port
Nokia 105s Gateway Installation Guide
33
9600 bps
8 data bits
No parity
1 stop bit
To connect to the console with a null-modem cable
1.
Connect the supplied null-modem console cable to the console port on the
front panel of the 105s.
Note
The supplied console cable is Cisco compatible.
Use only the RJ-45 port labeled Console on the front panel; the serial
(AUX) port is an auxiliary modem port.
One RJ-45 termination has a retractable shroud that releases or secures
the RJ-45 tab. Use this end of the cable when connecting to the console
port of the 105s.
For cable pin assignments for the console connection, see
“Console Port”
on page 35.
2.
Connect the other end of the cable to the VT100 console or to a system
running a terminal-emulation program.
The cable that Nokia provides with 105s gateways includes a latching
mechanism used to secure the cable to the console port or auxiliary port of
your gateway.
00525gen
Console port
Содержание 105s
