manualshive.com logo in svg

Noise Com UFX7000 Series, Руководство пользователя, Страница: 19 / 29

Поделиться
Скачать
Noise Com UFX7000 Series Скачать руководство пользователя страница 19

NOISE COM, INC. 

Pn:mm NA12            Enters PROG#n FRAME#m into non- 

                      Volatile memory.  The specific 
                      Command may be any that are 

                      Permissible for Keypad entry of 
                      Program Steps, plus the ability 

                      to specify a Step Size for the 
                      Signal Attenuator differs from  
                      That  of  the  Noise  Attenuator  Step.

 

 

 

T0nnnn or T0nnn.n     Specifies the start of a TRIGGER 

T1nnnn or T1nnn.n     sequence. 

              

             

Q

                     

Requests PNG Status report to the  

                                   GPIB Port. and Async. Port. If the 

                                   Async baud Rate is not Set-up, 
                                   Default is 9600.

              

 

M

 

  

Sends Diagnostic Memory Dump to the 

 

  Async. Port. 

REMOTE CONTROL EXAMPLES: 

 

NA0123 cr             Sets the Noise Attenuator to  
 

    ‘012.3’ 

 

NA12.3 NF0007 cr      Sets the Noise Attenuator to  
                      ‘012.3’ 

 
NA000.0  NS001.0 cr   Sets the Noise Attenuator to  

                      ‘000.0’ 
 

NAI cr                When following the above, sets the    
                      Noise Attenuator to ‘001.0’ db. 
 

NAI cr                When following the above, sets the  
 

  Noise Attenuator to ‘002.0’ db. 

 
NAD cr                When following the above, sets the  

                      Noise Attenuator back to ‘001.0’ db

 

 

NA0000 NS0010 TD0010  NAI TD0010 NAI TD0010 NAD cr 

  Performs the same functions as the  
  Group above, while inserting a 1- 

  Second Time Delay between each  
  Change.

 

      

Document M016301

  

   Pg 21                 

Rev. 2  2/26/03

 

 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание UFX7000 Series






























Отзывы:

Нет отзывов