Nogueira FTN-1900, Инструкция по эксплуатации

Страница: 261 / 280

Instructions Manual
121
6. Maintenance
ENGLISH
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Procedure for oil changing:
1.
Place the machine on a flat and level place;
2.
Put an appropriate recipient under the
drain plug so that the dripped oil from
the gearboxes is collected;
3.
Remove the fill plug, drain plug and allow
the oil to drain completely;
4.
Replace the drain plug;
5.
Fill with the recommended oil;
6.
Replace the breather.
Recommended oil: 150/CLP.
Viscosity: ISO 150.
Specification: DIN 51517/3.
Oil Capacity
( D ) PTO Gearbox: 2.3 liters.
Checking the oil level:
Wipe around the level plug on the gearbox.
Loosen the level plug and check that the oil
reaches the hole in the plug;
If necessary, add lubricating oil until it begins
to seep through the hole in the level plug.
Oil Change:
First exchange: after a week or 50 hours of
work, whichever comes first.
Other changes: every year or 500 hours of
work, whichever occurs first.
6.16.9- Gearbox (D)
DRAIN
LEVEL
D
SUPPLY