Nodal Ninja Fanotec MECHA, Руководство пользователя

Страница: 96 / 109

96
MECHA User’s Guide v.05.4
‒
Dual Axis
© 2020 FANOTEC
Step 2
1. Power off both MECHA units in case they are running. To do that, hold
down the power bu�on,
⏻
, for 3 to 5 seconds.
2. Power up the horizontal MECHA (hold down the power bu�on,
⏻
, for 3
to 5 seconds). Wait un�l the spli�ng lights ( -=-=-=-= ) end and all LEDs
are off. The unit powered up first, rotates horizontally , so we name it
MECHA-H .
3. Enter the power code in the MECHA-H using the MECHA-H bu�ons.
A�er entering the code, MECHA-H gives 5 beeps, if not muted in
se�ngs. That means "
I'm ready, another unit can pair to me ".
4. Power up the other MECHA using its power bu�on,
⏻
, and wait un�l
spli�ng lights ( -=-=-=-= ) end and all LEDs are off. The second powered
up unit rotates ver�cally , so we name it MECHA-V .
As an alterna�ve to „Wait un�l spli�ng lights end”, on steps 2 an 4, you can
press bu�on
[1] when LEDs shows -=-=-=-= .
5. Enter the same power code in the MECHA-V using the bu�ons of
MECHA-V. A�er entering the code, MECHA-V gives 2 beeps, if not muted
in se�ngs. That means "
I'm done, I'm the pair of MECHA-H ".
On successful pairing, MECHA-H has the middle LED on, and the MECHA-V
has the two middle LEDs on. Otherwise, power down and up both MECHAs
again, preferably power up the MECHA-H first.
Next step is to test the combo using MECHA’s bu�ons, and see how it
works.