Nodal Ninja Fanotec MECHA, Руководство пользователя

Страница: 72 / 109

72
MECHA User’s Guide v.05.4
‒
Dual Axis
© 2020 FANOTEC
For 2 Zeniths 90° apart, the ZZ conven�on can be used, or ^90 which tells to
use 90° interval between Zeniths instead of the computed 360°/2.
SL,0x12,45x12,-45x12,N,ZZ
SL,0x12,45x12,-45x12,N,Zx2^90
The same way, for 2 Zeniths 120° apart:
SL,0x12,45x12,-45x12,N,Zx2^120
Now, for Zeniths at a �lt of 80° instead of 90°, which might help in automa�c
control points, because the Zenith is just like any row, but at a �lt of
90° ,
90x1 will do the same as Z , thus 80x1 is what you need for a Zenith at a �lt
of 80° instead.
For 2 Zeniths at a �lt of 80° and 180° apart, 80x2, and for 2 Zeniths 90°
apart, we can use
80x2^90 , thus we will end with this script:
SL,0x12,45x12,-45x12,N,80x2^90
Suppose that the rows at a �lt of +45° and -45° must have 10 posi�ons
instead of 12, then the script can be changed as follows:
SL,0x12,45x10,-45x10,N,80x2^90
The above apply for Nadirs as well, in which case the N,
NN, -90x1, -80x1, -80x2^90 can be used.
The Nadir is like a row at a �lt of -90° .
Let's take a pause.
Some�mes, to the above, we need a pause, say, before
the horizontal row, or before Nadir, to be sure we are out
of view.
The pause can be added using P , so
0x12 will mean: at a �lt of 0°, a row of 12 posi�ons, while
P0x12 will mean the same, but with a pause before, and
MECHA will wait for bu�on � to be pressed, or for UI
[PAUSE] to be pressed, or for the pause bu�on of the NN
IR Remote to be pressed, to con�nue.
NN IR
Remote