Nodal Ninja Fanotec MECHA, Руководство пользователя

Страница: 33 / 109

0.001 sec and B:5 sec , the result will be a shot at every 5 seconds. If
movements are executed, the value of B needs to be large enough to
cover the �me taken by the move.
◦ Also, when W delay is nega�ve, a log file – /intervals.txt – will be
produced, with all intervals, in ms, between the triggers of the
shu�er done by MECHA.
• B (Before) - the pause before each bracke�ng sequence or set of images.
If the value is nega�ve, up to 2 seconds will be used for Mirror Lock Up.
• M (M odifier of Exposure) - modifier of the dura�on of shu�er bu�on
signal, a list of mul�pliers, like 1,0.5,2 for normal, half and double
exposure �me in case of 3 IMG, or it can be entered as -0.7EV (for under,
normal, over), or 0.7EV (for normal, under, over), in which case it will
automa�cally extend to the number of IMG. If the modifier starts with
B, like B-2EV, or B1, or 1,0.5,2, the ”Bulb” mode will be assumed.
• E (E xposure) - dura�on of shu�er bu�on signal, for example, 3 or 0.5*3
for progressive half Exposure, or 2*3 for progressive double Exposure in
a set. These can be entered as custom values. The values can be entered
as 1/100.
• A (A �er) - the delay a�er each bracke�ng sequence or individual image.
If the value is nega�ve, there will be a delay a�er each shu�er actua�on.
• Degrees of rota�on - the rota�on angle between two consecu�ve
posi�ons in a sequence, specified for [N x LEFT] or [N x RIGHT] bu�ons.
The rota�on angle is updated automa�cally, simultaneously with the
number of
Shots . However, if the rota�on angle is changed, the number
of Shots does not change. Use this feature when you want to take a
certain number of shots, not an en�re panorama. Specify this number in
the next field (
x N ), and execute the sequence with the [N x LEFT] or [N
x RIGHT] bu�ons.
• x N - the number of moves (N) for [N x LEFT] or [N x RIGHT] bu�ons.
• Wait/Rewind - these op�ons tell MECHA to wait a�er last shoot, or to
rewind to ini�al posi�on. Rewind is useful if there are cables a�ached,
or for par�al panorama and �me-lapse.
• Repeat - delay in seconds un�l the shoo�ng sequence will be repeated
automa�cally, for example, 300 for 5 minutes, or 4*300 to repeat 4
�mes 5 minutes apart, or 0, or
no repeat , for no repeat.
• Single/Dual/Scripted - select Single if you use one MECHA. See MECHA
MSS for details about Scripted op�on.
33
MECHA User’s Guide v.05.4
‒
Single Axis
© 2020 FANOTEC