Nodal Ninja Fanotec MECHA, Руководство пользователя

Страница: 81 / 109

81
MECHA User’s Guide v.05.4
‒
Dual Axis
© 2020 FANOTEC
• 8:45 ‒ 8 posi�ons from now on (2nd MECHA will �lt to 45°)
• 6:60 ‒ 6 posi�ons from now on (2nd MECHA will �lt to 60°)
Now, something different: instead of saying 2:90 ,
which means two posi�ons at a �lt of 90° (which will turn to be 180° apart,
and it could be good as well), we say
2^90:90 ,
which means two posi�ons 90° apart at a �lt of 90° ‒ for example, for two
Nadirs 90° apart ‒ then the same for two Zeniths
2^90:-90 ,
then go back to 0° �lt.
Changes can be made to this presets as well.
If you need more rows, for exemple two extra rows, change the numbers of
repeats by click on
Repeat and enter, via Custom , 10*1 instead of 8*1.
Suppose we need 2 more rows at -70 made of 4 posi�ons each:
P10:-12,8:-45,6:-60,4:-70,10:12,8:45,6:60,4:70,
2^90:90,2^90:-90,0
If we want the order of rows to be changed, their posi�on in the list of
angles can be adjusted, for exemple, with the posi�ve �lts first:
P10:12,8:45,6:60,4:70,10:-12,8:-45,6:-60,4:-70,
2^90:-90,2^90:90,0
Again, the Repeat must be set at Repeat 10*1 sec .
If, for some reasons, more seconds are needed between rows ‒ for
example, 5 seconds ‒ the
Repeat can be set at Repeat 10*5 .
Also, the number of posi�ons can be changed as well:
P12:12,10:45,8:60,6:70,12:-12,10:-45,8:-60,6:-70,
2^90:-90,2^90:90,0
Then you can click on [Save 1] to save and assign this preset to bu�on [1] of
MECHA-H-DAC. From now on, you can launch this preset by simply press [1]
then � (for clockwise rota�on) when MECHA is idle, or press [1] then � (for
counter-clockwise rota�on)
Also, you can click on [Save] bu�on to save it on MECHA, in the Presets list,
with a desired name.