16
Fig. 13: Battery indicator
7. BATTERY CHARGING AND REPLACEMENT
•
Only qualified personnel are allowed to service or charge the batteries. Must follow the
instructions of this manual and the explanations of the manufacturer.
•
The battery is maintenance-free; refilling is not allowed.
•
Recycling of batteries undergoes national regulations. Follow the regulations.
•
By handling batteries, open fire is not allowed, as it may cause gas explosion.
•
In the area of battery charging neither burning materials nor burning liquids are allowed.
Smoking is prohibited and the area must be ventilated.
•
Park the truck securely before starting charging or assembling/replacing batteries.
•
Before finishing the maintenance work, make sure that all cables are connected
correctly and there are no disturbing towards other parts of the truck.
For lead-acid battery model, the stacker equips with:
12V/ 85Ah lead-acid battery, 2pcs
For lithium battery model, the stacker equips with:
24V/ 60Ah lithium battery, 1pc
THE WEIGHT OF BATTERY WILL AFFECT OPERATION OF THE TRUCK.
PLEASE CONSIDER THE MAXIMUM OPERATING TEMPERATURE OF LEAD ACID BATTERIES.
a.Replacement
b.Battery Indicator
Fig. 12: Battery replacement
Park the truck safely, turn off the stacker with the key (12) and press
the emergency button (6). Unscrew the 2 screws on the main cover
and remove the main cover. Remove the screws on the negative
anode from the two batteries (indicated as ‘-’), then remove the
screws on the positive anode (indicated as ‘+’), put the wire harness
aside, loosen the battery cover and remove it. Observe when
removing the battery and do not touch the upper electrical indicator
display or the oil tank on the side. Remove the second battery of the
lower position (only for lead-acid truck) in the same way,The
installation way is in reverse way. Please connect the positive anode
of the battery first. Otherwise, the truck will be damaged.
②
two lead-acid batteries;
③
A lithium battery;
1. The battery capacity is indicated as percentage, and the full charge
is 100%.
2. The "wrench" symbol on the indicator display indicates that the
controller is malfunctioning. It is not displayed if there is no fault.
3. "FC" is the abbreviation of “Fault Code”, which means fault code;
