12
Fig. 6: Fixing points
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING
a.Commissioning
Table 2: Commissioning data
After receiving our new pallet stacker or for re-commissioning you have
to do following before (firstly) operating the truck:
•
Check if are all parts included and not damaged
•
Check the package and charging of the battery (follow chapter 7)
•
Operate the truck according to the daily inspections as well as the
functional checks.
b.Hoisting/ transportation
For transporting, remove the load, lower the forks to the lowest position and fasten the truck safely with
dedicated crane or hoisting equipment according to Fig. 5.
Hoisting
Use dedicated crane and hoisting equipment.
Do not stand under the swaying load.
Do not walk into hazardous area during hoisting.
Park the truck securely and lash the truck according to the
points identified in Fig. 6. Hoist the truck to its destination
and place the truck securely before removing the hoisting
equipment.
Transportation
ALWAYS FASTEN TRUCK SECURELY DURING TRANSPORTATION ON A LORRY OR TRUCK.
Lower the forks and park the truck securely. Fasten the truck according to Fig. 6 by fixing
dedicated lashing belts to chassis and mast, and fasten the other side at the transporting
lorry.
Type
PSE10L-C/1600
PSE10L-C/3500
Commissioning weight [kg]
465
585
Dimensions [mm]
1600
3500
Fig. 5: Hoist with a crane
