17
A. SPECIFICATIONS
Input Volt: 150 – 260 V, AC 50 – 60 Hz
Output Volt: 145 V ±0.3
Output Current: 5 – 6 Amp
Applicable Ambient Temperature: –15 - +65
℃
B. OPERATION
1. Insert the plug of the power cable into the socket of the power line.
1) Power Indicator lights (red)
2) Charging Indicator turns on red, indicating the battery is in charging.
2. When Charging Indicator turns from red to green, the battery is nearly full. Charging
can continue in the Floating Stage.
3. When the battery is fully charged, disconnect the Power Cable from the Power Line.
+12 V Output Cable has power.
C. WARNING
1. During charging the truck can’t be lifted electrically!
2. Do not use the truck in wet areas or conditions.
Table 3: Charging LED
LED- signal
Function
Red
Battery discharged
Green
Fully charged
When charging is finished, disconnect the connector from the socket and place it in the designated pocket.
e.
Charging with external charger (only ACX 10E, optional)
The fully automatic external charger uses pulse charging. It can effectively alleviate the phenomenon of
cell polarization, extend the service life of battery and has fast charge, slow charge and float charge
functions. It automatically selects the charging state according to the detected battery voltage and
converts into floating charge state when the battery is fully charged.
Disconnect the Emergency plug and connect the charger plug with the battery sided connector. Connect
the power cord of the charger to the main power supply. After switching on the charger, the charging starts
automatically.
For further information read the instruction handbook of the external charger.
8. REGULAR MAINTENANCE
•
Only qualified and trained personnel are allowed to do service on this truck.
•
Before servicing the truck, remove the load and lower the forks to the lowest position.
•
Completely immobilize the truck before working on components that might pinch
fingers or hands if movement were allowed.
