16
b.
Battery indicator
c.
Discharge status is indicated by ten red LED segments.
Battery discharged
Battery full charged
Fig.13: Battery discharge indicator
•
When the battery is properly charged, all LED lights. During discharge successively less LEDs lights up.
•
When the most 3 left LEDs lights, the battery is fully discharged. The battery must be charged before
further operations, otherwise the lifetime of the battery will be reduced and/or the battery could be
damaged!
d.
Charging with Onboard charger (only ACX 10E, optional)
•
The attached automatic charger is only available
for the optional voltage of 110V or 220V as
referred.
•
The room, where you are charging must be
ventilated.
•
The exactly charge status can be only checked
from the dischrge indicator. To control the status,
the charging must be interrupted and the truck
must be started.
•
Park the truck at a dedicated secured area with a
deidcated power supply. Lower the forks and
remove the load.Switch the truck off and connect
the main power connector to the power supply.The charger starts charging the battery.
•
This Charger features a three-stage charging function with automatic switching from 1st
stage to the next stage.
The 1st stage: Constant current charging
The 2nd stage: Constant voltage charging
The 3rd stage: Floating charging
Following the increase of the electricity in the battery, the charging electrical current is
reducing, the charger steps into the 3rd stage automatically.
Fig. 14: LED- Status
