Nobis UNICA 10 C, Инструкция по установке, использованию и техническому обслуживанию

Страница: 33 / 40

Use and maintenance manual - Model: “UNICA 10 V/C”
33
ENGLISH
With a soft brush, eliminate the combustion
particulate, letting it fall in the ash slide.
Vacuum the cast-iron combustion plate and the fire
pit, fpaying attention not to knock the nozzle of the
vacuum cleaner against the vermiculite.
Lift the “cold lever”, supplied with the product,
to unlock and open the fire door, as in the figure
below:
18.3 CLEANING THE ASH PAN
Remove the pan from the appliance and remove the
ash deposited, using an ash vacuum cleaner; pay
utmost attention to the presence of embers that could
still be hot and which could damage the appliance
used for cleaning.
The cleaning operations depend on the quality of
the pellets used and the frequency of use of the
product. It can happen that such operations must
be carried out more frequently than stated in the
manual.
18.2 CLEANING THE GLASS DOOR
To clean the glass, use a cotton cloth or kitchen paper.
You are advised to clean the glass using a damp cloth
with water and combustion ash (with an abrasive
function), avoiding use of products with additives that
could, over time, wear the seals, glass and paint.
Do not switch on the appliance if the glass is dam-
aged. Contact the support service to replace it.
OPERATING PROCEDURE:
Clean with a cotton cloth as in the figure below: