Use and Maintenance Manual model “B10 V ULISSE”
20
ENGLISH
A “flame” symbol with the writing ON - without dis
-
playing the working power - will appear.
In order to switch off the product, as well as reset
alarms, keep pressed key . An acoustic signal will
follow.
On models equipped with automatic cleaner, a brazier
cleaning phase will be activated before entering into
SWITCH ON mode.
In the event of an IGNITION FAILURE after pressing ,
a POP UP will signal the need to suck the pellet from
the brazier before turning the appliance back on,
thus avoiding discharge of unburned pellets into the
ash drawer.
10 OPERATION
Products in the range include 7 different power levels.
Below you can find a description of how the appliance
will work once the desired room temperature - if set - is
reached.
10.1 SAVING MODE
While operating, the appliance works to reach the
desired room temperature; when this condition is met,
power is reduced and the product enters into SAVING
mode, a phase in which fuel consumption is kept minimal.
Now, a series of clarifications on the benefits of the
AUTO function, to switch to economy mode and/or
return to normal operation, are made necessary:
•
Ventilation, if present and enabled, works in
different operating modes, depending on the
existing discrepancy between set temperature and
actual temperature in the premises.
• The appliance gradually increases the fireplace
power as soon as temperature in the premises goes
below the set values (combustion optimization and
acoustic comfort).
During the first activation of the product, unpleasant
odours - or smoke caused by evaporation or drying
of certain materials used - may occur. This phenom-
ena will disappear after some hours of use. During
this period, it is recommended to keep the premises
well ventilated.
The screen in SAVING mode will appear as follows:
10.2 COMFORT CLIMA FUNCTION
As described in the “saving mode” paragraph, the ap-
pliance has the objective of satisfying the thermal com-
fort required by the user. When COMFORT CLIMA (function
included in SAVING MODE) is active, it also ensures - if the
house has a good energy class - a saving of fuel by
means of intelligent switch on/off system (upon setting/
achievement of the desired temperature). Below you
can find the procedure to activate this function and a
thorough description of all those values which can be
set, along with a practical example.
OPERATING PROCEDURE:
MENU >> USER >> COMFORT CLIMA
Access menu by pressing
Scroll entries to SETTINGS with
Access menu by pressing
Scroll entries to COMFORT CLIMA and press
Once on COMFORT CLIMA, press
The function screen with all setting parameters to be
activated and adjusted will appear as in the figure
below.
OK
OK
OK
Enable/disable the function by pressing and:
• Go back to
USER by pressing .
OR
• Move on - by using - to the choice of
time in
saving mode before the function switches off the
product.
Edit values by using
OK
Confirm your selection by pressing and go to
temperature setting, to set the value under which
the product must switch on.
OK
Always vacuum the brazier using an ash cleaner.
FIRE HAZARD.
