Use and Maintenance Manual model “B10 V ULISSE”
11
ENGLISH
ENGLISH
Place the slider on the base of the compartment,
making sure that the top is not inclined.
Using the 4 holes on the slider, drill the top (Ø 8
mm bit). Use 4 plugs and relative M8x40 screws
and washers to fix the slide; reposition and secure
the product, sliding it closed until you hear the
safety mechanism clicking.
4
Final result.
Check if, with the appliance locked closed, the
safety microswitch of the power supply is pressed.
5
5
6
6
5
Release the insert from the slider (steps 1-4 of the
previous paragraph). Attach the slider to the
support by using the 4 M8 x 40 screws, the washers
and the 4 M8 nuts (supplied with the product).
Reposition the product, fix it to the slider with the 4
wing-head thumb nuts, making it slide closed until
you hear the safety mechanism clicking.
With the appliance locked closed, check whether
the safety microswitch of the power supply is pressed.
6
3.9
PELLET LOADING METHODS
There are 3 possible solutions to load pellets:
- slide the appliance open (standard);
- use the pellet drawer (optional)
- use the wall pellet-loading system (optional).
SLIDING
Open the appliance by using the handle to be found
in the box together with the instruction manual.
With your index finger, press down on the lever at the
lower right - under the handle’s hook - to unlock the
safety mechanism and slide the appliance open.
1
2
1
2
3
4
1
By using a screwdriver and a Ø 8 mm hex wrench,
fix the metal sheets to the 4 frame supports with
the 5x12 screws supplied with the product.
With the 5x12 screws, fix the two upper metal she
-
ets on the left and right-hand side of the support
respectively.
1
2
3
Adjust the structure’s height by putting the 4 sup-
ports in the frame, fixing them with 5x12 screws.
Place the structure and drill the floor with a Ø 8
mm bit, then fix the structure to the floor by using
the 4 plugs and pertaining screws and washers.
3
4
MOUNTING AND FIXING THE INSERT ON THE SUPPORT
In case a support surface is not available, it is possi-
ble to order a specific adjustable support to be fixed
on the floor.
5
6
2
4