Nobis A10C ROUND, Инструкция по установке, использованию и техническому обслуживанию

Страница: 12 / 40

Use and Maintenance Manual model “A8 - A10 V/C ROUND/TOP”
12
ENGLISH
3.11 ELECTRICAL CONNECTION
The product power supply cable must only be con-
nected after concluding installation and assembly
of the product, it must not be in contact with hot
parts and must remain accessible after installation.
To carry out electrical connection, proceed as de-
scribed below:
• connect the power supply cable on the back
of the appliance;
• connect the cable plug to the
current socket on the wall.
You can connect an outer thermostat with timer to
the appliance for its regulation or to switch on and
off. For connection and management of the “outer
thermostat” function, refer to the specific chapter
in the following pages of this
manual.
LOWER FRONT MAJOLICA ASSEMBLY
Open the door that hides the ash drawer and re-
move the lower front majolica and 4 screws (M5x12)
from the packaging. Position the majolica on the
external side of the door (holding it with your hand)
and using the 4 screws fix the majolica through the
pre-drilled holes.
When finished, replace the cast iron top.
Below the final result.
ASSEMBLY OF THE UPPER SIDE PANEL
Remove the panel, previously disassembled, and
insert the pins located in the lower part of the panel,
into the holes on the previously fixed majolica
casing. Bring the panel into position and fix the up -
per part with the screws,previously removed, paying
attention to align correctly with the stove door.
Repeat both operations for mounting the opposite
side.