19
During periods of equipment rest clean it thoroughly (see section clean of this chapter) and check the parts
replacing those worn or damaged (follow the instructions chapter 5 "Maintenance”.) Grease all parts and put the
equipment in a unexposed and dry place in order to have it in perfect condition at return to work. It is advisable
to keep the machine under cover or at least cover it with waterproof canvas.
Transport by tractor:
To carry the shredder NOBILI S.p.A. proceed as indicated below, leaving your machine mounted on the tractor.
-
Turn off the machine by stopping the rotation of the PTO and wait until the rotor is stopped.
CAUTION:
When the PTO is off the shredding rotor still turns up to a minute due to inertia. Must therefore wait
until the machine is completely stopped before proceeding with any transaction.
-
Raise completely the forestry shredder to the ground.
If you travel on highways, remember that you must affix the signs on projecting loads (as defined in Chapter
"Terms of Use").
During transportation Never operate the control levers and even the one of the tractor lifting.
The drive shaft and the rotor must always be stopped during transits.
Limit the speed of the tractor. In the case of holes or depressions in the ground the backlash could drive up the
shredder over the desired extent with the risk to damage the tractor.
Please note, that the upward movement of the wheeled landing is not restrained in any way.
The speed must always be adapted to soil conditions.
Although not listed in this booklet refers to the laws and regulations in force in the country of use of your machine
NOBILI S.p.A.
Chapter 8
Transport
Seasonal repose
How to transport
