background image

35

Installer’s Guide 

Nobeltec InSight Radar (IR2)

CAUTION

The amount of non-radar network traffic can dramatically reduce the 

quality of the radar presentation. This is particularly true if using a 

wireless network or when using the network for high-bandwidth uses 

such as browsing the Internet or sharing files.

CAUTION

PC network installations can be significantly more complicated. Make 

sure to verify that the network is properly setup and running, and 

that a qualified network administrator is on-board. Other than limited 

phone support, Nobeltec is not able to provide support on Network 

installation or operation.

CAUTION

Wireless networks function with limited bandwidth and are susceptible 

to RF interference. Please check with Nobeltec for tested network 

components.

How does the IR2 Control Box know what IP address to use?

When powered on, the IR2 Control Box attempts to communicate to the network to 

request an IP address. If a router or hub or other DHCP serving device responds 

with an IP address, then the IR2 Control Box knows it is on a network and operates 

with the assigned IP address. It is then available by all copies of Nobeltec Admiral 

on the network. If after a short time no IP address is given, then the IR2 Control box 

defaults to its backup IP address which is 192.168.0.1. Resetting the IP address on 

the Control box only happens if the power is recycled on the control box.

The PC Connection

Содержание InSight Radar 2













































































Отзывы: