FITTING YOUR NAUTILUS WINCH
– Models G8, G16 and G23
Take a few moments to determine the correct siting of the winch. To avoid riding turns, the
sheet should lead up on to the drum at an angle of 5
– 10 degrees. If using a rope clutch in
conjunction with the winch, be sure to site a minimum of 200mm apart. Use the support plate
as a template for drilling fixing positions and subsequently as a support plate beneath the
deck, coaming or coachroof.
To affix, undo the spiral circlip on top of the winch and slide off the drum with top washer, this
will expose the base plate through which six M6 countersunk bolts (not supplied) of the
required length are inserted.
Circlip removal
Spiral clip Drum Base plate Marking bolt holes
