Nobeltec InSight Radar 2, Руководство по установке

Страница: 19 / 76

13
Installer’s Guide
Nobeltec InSight Radar (IR2)
Installing the Antenna Unit
When you have decided the place of installation, prepare the mounting bracket or
platform as shown in Figure 2.3. If the surface of a platform or mounting base is
not even, insert appropriate fairing materials between the antenna pedestal and the
mounting surface to ensure a stable mounting platform.
Figure 2.3: Recommended mounting base or platform
Using the included drill-hole template (or you can refer to the drawings in Figure
2.4), drill holes for the five locations on the mount base and use these holes to fix
the scanner unit to the mount base with hexagonal bolts. The bolts included with
your radar equipment will suffice for mount base thickness of 9 to 14 mm (0.35 to
0.55 in.). If the mount base is thicker or thinner than this, prepare the bolts listed in
the tables 2.1 and 2.2.
Mounting diagram for
IR2-4D
Mounting diagram for
IR2-4x, 6x, 12x, 25x
Figure 2.4: Mounting diagrams
Note: Access hole for vertical cable entry only.
Hardware Installation