E2S STExC1, Инструкция по эксплуатации

Страница: 1 / 19

INSTRUCTION MANUAL (ATEX / IECEx)
STExC1
Combined Sounder & Beacon
For use in Flammable Gas and Dust Atmospheres
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880
Document No. D199-00-601-IS Issue 4 17-01-22 Sheet 1 of 8
STExC1X05R STExC1X05F
1) Product Table
Unit Type Code
Nominal
Input Voltage
Voltage Range
Nominal
Input Current
Max.
Current
Sound
Pressure Level
dB(A)
Max* Nom
.†
STExC1X05RDC012 12Vdc 11.5-14Vdc 885mA 1,002mA
109 101 STExC1X05RDC024 24Vdc 20-28Vdc 508mA 555mA
STExC1X05RDC048 48Vdc 42-54Vdc 325mA 427mA
STExC1X05RAC230 230Vac 220-240Vac 50/60Hz 127mA 149mA 109 101
STExC1X05FDC012 12Vdc 11.5-14Vdc 885mA 1,002mA
115 109 STExC1X05FDC024 24Vdc 20-28Vdc 508mA 555mA
STExC1X05FDC048 48Vdc 42-54Vdc 325mA 427mA
STExC1X05FAC230 230Vac 220-240Vac 50/60Hz 127mA 149mA 115 109
*Max = Tone 4
†
Nom. = Tone 44
‡ x̄
= Average over 64 tones
The table shows the input current taken by the various sounders.
Supply voltage variation of +/-10% outside the voltage range is permissible.
The current levels shown above are for the 440Hz Continuous tone @ nominal input voltage.
Nominal current at nominal voltage and 1Hz flash rate.
Max rated current at worst case supply voltage.
Table 1
–
Product table
Ensure the system power supply is capable of providing the maximum current required for all beacons. Review associated cable size,
length and quantity of beacons on each circuit.