Adjustable mounting solutions
S15P / S19P / S21Wx / C‐Series
Product Information
3095-US-1.2
www.noax.com
Page 3 of 14
1.2
General information
The attachment of the Industrial PCs on the mounting solutions is done via the VESA
MIS‐D,100,C mount of the IPCs – based on the “VESA (FDMI™) standard”.
(attachments at a distance of 100 mm square to one another).
All four mounting points at the mounting brackets of the adjustable mounting solutions
have to be used for installation. Also pay attention to the chapter for VESA mounting
from the user manual of the Industrial PC.
There are drill holes on the right and left side of the mounting solution for a optional
protecting earth connection.
Mechanical catches allow you to adjust the device to the desired position at 10° inter
vals with little force. Two locking handles are used to lock the position of the device
securely in place.
The position locking for the device and the function of the locking handles have to be
checked in periodic intervals. If one of these checks is negative, the mounting solution
have to be put out of operation.
Keyholes in the mounting brackets of the mounting solutions allow noax Industrial PCs
to be mounted easily and conveniently.
Caution - Risk of electric shock!
To avoid damages, the cables have to be routed to the Industrial PC in a way, that they
can't be rushed or sheared off.
If a connector protection is been used with the mounted Industrial PC, the alignment of
the connector protection has to be choosen in a way, that damages of cables will be
avoided when the position of the IPC on the adjustable mounting solution is changed.
Choose the mounting position of the adjustable mounting solution regarding to er
gonomic principles and pay attention to lightning conditions, viewing angle and so on.
For choosing suitable cleaning agents, a list with the used materials from the ad
justable mount solutions can be requested from the noax hotline.
For further information please visit our website at www.noax.com