noax 14950 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 14

noax 14950 Скачать руководство пользователя страница 14

Adjustable mounting solutions
S15P / S19P / S21Wx / C‐Series

Product Information

www.noax.com

3095-US-1.2

6

Handling the mounting solution

6.1

Safety instructions

Danger of crushing and jamming limbs!

If there is uncontrolled movement of the Industrial PC, limbs can be jammed between
IPC and mounting solution. Also limbs can be crushed or jammed between parts of the
mounting solution.
Therefore, hold the housing on the bottom when adjusting the mounting solution.

Caution - Risk of electric shock!

To avoid damages, the cables have to be routed to the Industrial PC in a way, that they
can't be rushed or sheared off.

Caution!

Do not apply more than 30 kg load to the mounting solution!
Any load greater than this will cause irreparable damage to the mounting solution
and/or uncontrolled movement of the Industrial PC.

Note:

Tighten the locking handles only when they are locked in position!
This will ensure that the IPC housing will be held in place in the position selected.

Note:

To adjust the mounting solution, just loosen the locking handles and do not unscrew
them! Always tighten both locking handles again after adjusting the mounting solution!
The locking handles ensure the device is positioned securely.

6.2

Adjusting the the mounting solution

"

Hold the housing of the Industrial PC on the bottom!
This will prevent undesired movement of the IPC after the locking handles are
loosened.

"

Loosen both locking handles one after the other until the Industrial PC can be
moved. Do not unscrew the locking handles!

"

Move the Industrial PC into the desired position and selected the closest click
position.

"

Tighten both locking handles.

"

Lift the Industrial PC slightly and tighten the locking handles again. This will improve
the click‐in position again.

noax Technologies AG

Am Forst 6
85560 Ebersberg (Germany)

Tel. +49 (0) 8092 8536 0
Fax +49 (0) 8092 8536 55

Hotline: +49 (0) 8092 8536 33
[email protected]

noax Technologies Corp.

5265 Parkway Plaza Boulevard, Suite 110
Charlotte, NC 28217 (USA)

Phone +1 704 992 1606
Fax

+1 704 992 1712

Hotline: +1 704 992 1606
[email protected]

«
...
12
13
14

Содержание 14950















Отзывы:

Нет отзывов