NKT Photonics A301-100-000, Руководство по эксплуатации продукта

Страница: 23 / 47

23
2 Installation
Caution: For reliable operation, the SuperK VARIA should not be exposed to cor -
rosive agents or excessive moisture, heat or dust.
Caution: Ambient operating environment specifications are listed in
Table 7
.
Caution: This product is not UL-approved but all safety components are UL-ap -
proved.
Installation process
The following steps outline the installation process:
1. Prepare a suitable installation platform for the VARIA.
2. Place and fasten the VARIA to the prepared installation platform ensuring the
optical outputs are aligned with the intended application.
3. Turn all optical output shutters to the Closed position.
4. Insert the SuperK output collimator into the Optical Input receptacle. See
“Optical Connections” on page 24
.
5. Using an external bus cable, connect the External Bus port of the SuperK
laser to the Bus Input port of the VARIA. See
“Electrical Connections” on
page 26
.
6. Place and connect the included bus defeater onto the VARIA Bus Through
port connector.
7. Turn the SuperK laser power ON.
8. Observe and ensure the power and Interlock LEDs are ON. See
“Status LEDs”
on page 21
to interpret their status condition.
General
All chassis types must be installed on a level surface that is free from vibrations.
The SuperK VARIA can be fastened to both metric and imperial optical tables.
The ambient temperature surrounding the laser and VARIA should be stable and
free from anything that could cause temperature fluctuations. Temperature
changes and vibrations may affect the device operation and result in abnormal
operation.
Caution: The SuperK VARIA is intended for use with the SuperK Class 4 lasers sys -
tems only. Using the SuperK VARIA with a laser source other than a SuperK laser
may result in hazardous radiation exposure.
Warning: To operate these systems, you must be familiar with laser safety regulations
and have received instruction in the safe use of lasers.