NKT Photonics A301-100-000, Руководство по эксплуатации продукта

Страница: 26 / 47

Electrical Connections
26
Electrical Connections
External bus
For basic operation, connect the External bus of the SuperK laser to the Bus
Input of the VARIA. To connect the bus:
1. Disconnect power from the laser.
Caution: If the laser is powered ON when connecting the external bus cable,
DAMAGE can occur to both the laser and the VARIA.
2. Using a DB-15 male to male external bus cable (included with your laser or
accessory), connect the External bus connector of the SuperK laser to the
Bus Input connector of the VARIA.
Figures 12
and
13
show the connections for each of the devices.
Figure 12 Connecting the External bus - SuperK laser
Figure 13 Connecting the External bus and bus defeater - VARIA
3. Place the Bus Defeater (included with your laser or accessory) on the Bus
Through connector of the VARIA - see
Figures 13
and
14
.
Figure 14 Bus defeater
To VARIA
To SuperK
laser
External bus
cable
Bus defeater