NKT Photonics A301-100-000, Руководство по эксплуатации продукта

Страница: 25 / 47

25
Optical Connections
5. Push the collimator into the receptacle until its collar rests against the
chassis. As you push it in, the collimator will encounter some resistance, and
two distinct clicks as it locks in place.
Note: Again, you may need to turn the collar slightly to align the collimator key
with the alignment slot.
6. To secure the collimator in the receptacle, tighten the lock screw shown in
Figure 11
using a 2.5 mm hex key (Allen key).
Caution: Do not over tighten the lock screw, doing so may damage the threads.
Figure 11 Collimator lock screw
Inserted
collimator
Lock screw
2.5 mm hex key