WiMo / WiMo Plus Multiparameters Sondes
18
WEB Interface
3.1.4
Available parameters
When sensors are added or removed from the sonde, the sensors are detected and displayed by
clicking on the refresh button.
The sensors are listed and can be turned on/off. If sensors are enabled and set up other than "not
recorded" in the sensor's "recorded format" description, these sensors will be stored in files.
Depending on the sensors plugged you are able to have access to additional calculated parameters.
3.1.5
Connected accessories
When a wiper is detected, it appears in this topic. The "refresh accessories" button also refreshes the
sensors.
3.1.6
Acquisition settings
There are several sampling modes. In continuous mode a sample of each parameter is recorded at
the rate of "measurement period." Burst mode allows you to record a number of samples for a
shorter time period than "measurement period" at the rate of "measurement period."
Text field to enter a comment on the mission
Measurement period for all sensors
Measurement mode (by default continuous)
Start mode
Stop mode
Refresh accessories
Accessories available
Sensors on the sonde
Calculated parameters available
Sensors refresh
