NKE Hub'O, Начало работы

Страница: 11 / 14

Hub’O: Getting started
All Rights Reserved – nke Watteco® Hub’O: Description of the exchanges with the Server
Page 11 of 14
3.2.3 U
PLOAD ON
H
UB
’O
To upload the new configuration on the gateway, copy the configuration file “c_010_0000.json” and
its signature “c_010.manifest” on the root of a USB stick.
Then plug the USB stick on one of the Hub’O USB slots. Wait approximately 15 seconds and then take
back the USB stick, Hub’O is now configured as you wanted.
3.2.4 O
THER FILES
USB
UPLOAD
From the firmware version 02.00, it is possible to upload through USB two other kind of files: the
ModBus configuration file and the allowed end-devices list. In order to have an exhaustive
description of these files and how to complete it, please see the document named
“Hub'O_Server_Exchanges_Description_X_X.pdf”.
3.2.4.1 M
OD
B
US CONFIGURATION FILE
Filename to give to the ModBus configuration file before creating the signature file:
c_modbus_010_0000.json .
Command line to use to create the signature file:
Afterwards, both of the files (c_modbus_010_0000.json and c_modbus_010.manifest) needs to be
copied at the root of the USB stick.
3.2.4.2 A
LLOWED END
-
DEVICES LIST
Filename to give to the allowed end-devices list file before creating the signature file:
p_010_0000.json .
Command line to use to create the signature file:
Afterwards, both of the files (c_modbus_010_0000.json and c_modbus_010.manifest) needs to be
copied at the root of the USB stick.
FIGURE 6 - CREATING THE SIGNATURE FILE FOR THE MODBUS CONFIGURATION
FIGURE 7 - CREATING THE SIGNATURE FILE FOR THE MODBUS CONFIGURATION