Hub’O: Getting started
All Rights Reserved – nke Watteco®
Hub’O: Description of the exchanges with the Server
Page
7
of
14
Now, your Hub’O is ready to be switched “ON”.
The gateway is delivered with a power supply cable that can be connected directly to a
230
VAC/50Hz power supply
. The mounted cable do not have a plug on it, thus the phase wire and the
neutral wire can be directly cable to a
230 VAC/50Hz power supply,
in an electrical board for
example. If Hub’O needs to be connected to a socket, a plug needs to be added at the end of the
mounted cable.
CAUTION:
If the device is connected to the mains power source, harmful voltage will be present
on all wires during operation.
Connect or unconnect the device after
MAKING SURE TO HAVE SWITCHED OFF MAINS POWER
FROM ALL WIRES
(disconnecting a single wire e.g. from a manual switch is NOT sufficient).
9V Disposable Battery
spot
LCD screen
User button
Ethernet/3G switch
Ethernet connector
USB slots
SIM slot
Hole for
fastening screw
Hole for
fastening screw
Hole for
fastening screw
Connector for
external 8-18VDC
power supply
Connector for
230VAC/50Hz
power supply
FIGURE 3 - INSIDE THE HUB'O GATEWAY
Hole for
fastening screw
Содержание Hub'O
Страница 1: ...HUB O GETTING STARTED ...