27
10.5. Disconnect power supply.
11. Neon dot circuit components
DB1, DB2
Neon Bulb
R16, R17
270kΩ
R15
10kΩ
Q7
MPSA42
11.1. Resistors R15, R16 and R17 leads bend in accordance with item 3.1. Insert them into locations
R15, R16, R17 and solder their leads as pointed on the picture
.
11.2. Install the transistor Q7 legs into the board holes marked as Q7 that its case flat edge is above
the flat edge of the placement marking. Solder it each leg in accordance with sub-item 10.2
directions.
NOTE: Neon bulbs DB1 and DB2 you must install later after nixie tubes soldering.
Содержание IN-8-2
Страница 9: ...9 nixiediy gmail com Transistors BC547 Q5 Q6 BC557 Q1 MPSA42 Q7 IRF840 MOSFET Q2 EL817 OK1 OK6...
Страница 10: ...10 nixiediy gmail com Diodes 1N4004 D1 UF4004 D3 1N914 D2 LED 3mm LED1 LED6...
Страница 11: ...11 nixiediy gmail com Integrated Circuits LM7805 U1 MC34063 U2 K155 1 U3 ATMEGA328P PU U4 DS3231 U5...