8
To read a resistor code, first locate the gold band and read the colours in order from the other end.
(All resistors in this kit have a gold band indicating 5% tolerance.) The first two bands indicate digits in
the resistance; the third band (called the multiplier) indicates the number of zeroes to be added to
the digits to obtain the resistance. However, it is sometimes unclear in which direction the bands
should be read. Therefore, we recommend that the resistors will be identified with a multimeter.
Use the resistor code to identify and sort all of the resistors. One good way to keep them sorted is to
tape one end to a piece of paper and write the resistance and component number (R1, R2, etc.). Once
you have identified and sorted all of the resistors, you are ready to solder them to the PCB. To
prepare a resistor for insertion into the board, bend the two leads so that they form a right angle to
the resistor body.
Capacitors
0.1uF (Code 104), (C2, C3, C5, C6)
2.2nF (Code 222), (C4)
220uF 25V, (C7)
2.2uF 250V, (C1)
Содержание IN-8-2
Страница 9: ...9 nixiediy gmail com Transistors BC547 Q5 Q6 BC557 Q1 MPSA42 Q7 IRF840 MOSFET Q2 EL817 OK1 OK6...
Страница 10: ...10 nixiediy gmail com Diodes 1N4004 D1 UF4004 D3 1N914 D2 LED 3mm LED1 LED6...
Страница 11: ...11 nixiediy gmail com Integrated Circuits LM7805 U1 MC34063 U2 K155 1 U3 ATMEGA328P PU U4 DS3231 U5...