21
5. Microcontroller circuit components assembly
U4
Atmega328P-PU
R11
10kΩ
U4 Socket
28 pin socket
5.1. Take the resistor R11 and bend it, like pointed in item 3.1. Insert resistor into the board holes
marked as R11 and solder it leads.
NOTES:
•
Do not place the microcontroller U4 into the socket before you mount the socket onto
the board.
•
Mount the socket such that the notch in the socket lines up with the notch marking in
rectangular outline printed on the board.
•
After inserting a socket into the board, solder its two opposite-corners pins first. This will
hold the socket in place. Look at it carefully to check it proper orientation. If not, it is easy
to heat one or both pins and adjust the socket. Only if everythis correct, solder the rest
pins. Remember:
to keep the soldering time per pin brief. The pins do not need to clip.
•
The microcontroller notch indicates how IC should be mounted into the socket after the
socket has been soldered into the PCB.
Содержание IN-8-2
Страница 9: ...9 nixiediy gmail com Transistors BC547 Q5 Q6 BC557 Q1 MPSA42 Q7 IRF840 MOSFET Q2 EL817 OK1 OK6...
Страница 10: ...10 nixiediy gmail com Diodes 1N4004 D1 UF4004 D3 1N914 D2 LED 3mm LED1 LED6...
Страница 11: ...11 nixiediy gmail com Integrated Circuits LM7805 U1 MC34063 U2 K155 1 U3 ATMEGA328P PU U4 DS3231 U5...